Things to do before you start:

• Install MilitaryShield before bedtime to allow for drying overnight

• Turn off device and remove battery only if possible

• Use microfiber cloth to clean your screen

• Wash your hands with soap and dry

• Install in clean, dust-free environment

Some Quick Tips:

• Ensure screen protector lays completely flat on the screen. Hold it up against the light to see if you've pushed out all large air bubbles.

• Any bubbles or streaks you see after initial application is normal! They should disappear within 12-72 hours.

• WARNING: Please don't use excessive liquid or excessive heat as it may cause damage to your device, as we are not responsible for the outcome caused by it. As liquid damage could cause corrosion and heat damage can caused the device to malfunction.

Steps:

• Tempered Glass for 2.5D Cell Phone

1. Wash and dry your hands thoroughly to remove all oils and dirt.

2. Clean the screen of your device with the wet and dry wipes provided in your kit.

3. Place the applicator device directly on top of your phone screen.

4. Remove all the surface dust using the anti-dust stickers provided in your kit.

5. Peel off the protective layer found on the adhesive side.

6. Align the top of the screen protector with the applicator device.

7. Press down gently until it bonds to the screen surface.

Remove the applicator device from your mobile phone.

• Tempered Glass for 3D Cell Phone

1. Wash and dry your hands thoroughly to remove all oils and dirt.

2. Clean the screen of your device with the wet and dry wipes provided in your kit.

3. Place the applicator directly on the top of your phone screen.

4. Remove all the surface dust using the anti-dust stickers provided in your kit.

5. Peel off the protective layer found on the adhesive side.

6. Align the applicator with the top of the screen protector.

7. Remove the applicator from your phone.

8. Gently press along the edges of your mobile phone until the screen protector adheres firmly.

9. Use the squeegee to push any bubbles out away from the "Fingerprint Recognition Area."