top of page
  • AACL

How to Install: Soft Glass or Hybrid Screen Protector for Cell Phones


  1. Wash and dry your hands thoroughly to remove all oils and dirt.

  2. Please set your phone on the provided non-slip pad.

  3. Clean the phone screen thoroughly with theprovided cleaning kit.

  4. Place the applicator directly on top of your phone screen. Note the TOP and DOWN indicators.

  5. Remove all the surface dust with the anti-dust stickers provided in your kit.

  6. Peel off the protective layer found on the adhesive side.

  7. Affix the three holes at one end of the film on the three posts of the applicator tool, and then affix the other (TOP) side.

  8. Using the squeegee tool, and starting from the three holes side (bottom to top), gradually push any existing bubbles on the phone screen toward the edges of the screen until they disappear.

  9. Make sure you have removed all the bubbles before you attempt to peel off the protective film.

  10. Remove the applicator device from your phone.

39 views0 comments


bottom of page